
New display name
Members-
Posts
7,547 -
Joined
-
Days Won
216
Everything posted by New display name
-
I spoke to a maintenance guy one day when the T.O.T was returning to the station slowly who said to me "Each magnet has it's own transformer under it and when one transformer overheats it will trip out that magnet. If the T.O.T. program which is talking to each transformer with questions like are you there, are you working and so on does not get a response because the transformer has shut down the T.O.T program shuts down power to all transformers and resets them.” This happens a lot on hot days. I think the small incline heading towards the station washes a fair bit of speed off while the T.O.T has time to reset itself. I saw the T.O.T trip out as soon as it was shot out of the tunnel once and it did not make it up the curve of the tower. I think the track of the T.O.T. is designed to slow the car down on the return to the station when the transformers are tripped. If my ideas were correct, then this would take away the excitement of doing 160km to the last second because you would be slowing down up the incline while returning to the station instead of getting propelled back.
-
Would your idea take away some of the thrill of the T.O.T. I thought when then T.O.T is returning to the station it is getting propelled backwards by the magnets to keep the speed up. If this is so then what is your idea in keeping the speed up on the way back to the station?
-
Wet'n'Wild: New 2007 Attraction
New display name replied to mattcrombie's topic in Theme Park Discussion
It's about time you started to read other replies. As I am a person that works in this field and want to know what do you bring to the table in your uneducated replies. Don't make jokes about people if you have no idea what you are talking about. As the old saying goes don't judge a book by its cover. Just because you think its 3 storey high does not prove anything because you have no idea where these measurements are taken from. -
Wet'n'Wild: New 2007 Attraction
New display name replied to mattcrombie's topic in Theme Park Discussion
The Corkscrew is 28m high. The average height of a ceiling is between 2440mm - 3000mm. The average height of a slab is 300mm. If you add these 2 together and divided it into 28m you get 28/(3000+300)= 8.48 storeys. The town planning act states for housing 2 storeys with a max height of 8m if you divided 8m by 2 you get 4m and if you dived 28m by 4m you get 7 storeys. It would not have to comply to a storey but more likely a height limit. The Corkscrew being 28m sets a standard for the rest of the park. ( for example water front homes had a 3 storey limit but in the new town planning act this has been reduced to 2 storeys. If you had a block of land and you wanted to build on this today the act states it must be 2 storeys to comply to town planning but if this block had two 3 storeys on either side of it you are deemed to comply under the act to fit into the street scape and could apply and get a relaxation for this house to be 3 storeys. The council approve alot of relations for heights and how close you can build to boundaries but they will normally put conditions on it like screening to reduce the impact. The thurderbolt was 31 meters high only 3 meters higher then the corkscrew. You can understand the eye not getting approved since it is 60m high more then double the height of the Corkscrew. -
Wet'n'Wild: New 2007 Attraction
New display name replied to mattcrombie's topic in Theme Park Discussion
Corkscrew is already over 3 more like 5. So I think this could be used to show cause to the council. Laws have changed on the gold coast about heights. For example in some areas homes where allowed to be 3 but this has changed to 2. You have a case for a new dwelling to be 3 if the houses on ether sides are already 3 under the Gold Coast planning Act. Sea Word could use this to build to the same height of the Corkscrew. If they pulled the Corkscrew down then they would only be able to go to 3 instead of th current height of the Corkscrew. -
Wet'n'Wild: New 2007 Attraction
New display name replied to mattcrombie's topic in Theme Park Discussion
I think they could run jet boats around the seaway -
Superman Escape Closed For Maintenance
New display name replied to Gold Coaster's topic in Theme Park Discussion
There was a crane lifting up some of the track just before the first climb yesterday. -
Mick Doohan Motocoaster construction discussion
New display name replied to AugustVonPolen's topic in Theme Park Discussion
Dreamworld have changed there posting about Vintage Cars Avis Vintage Cars in River Town Temporarily closed during construction of a brand new attraction opening later in the year.` Do you think dreamworld is watching us? -
I would like to introduce myself. I'm Skeetafly. I am a 30 and for a living I am a draftsman. I enjoy creating my own plans of rides and seeing what crazy ideas I can come up with. I came by this on the web site and it got me thinking has anyone thought about doing the same thing in there back yard. Tell me what you think. http://www.youtube.com/watch?v=Q41ZUQng4p8
-
WhiteWater World Construction Discussion
New display name replied to Richard's topic in Theme Park Discussion
Make sure you take photos for us unlucky ones. -
WhiteWater World Construction Discussion
New display name replied to Richard's topic in Theme Park Discussion
I drove past www at 5.10pm today and the park was full of people. All of the slides where going. I would have taken pictures but did not have my camera on me. I will try on tuesday to take photos. -
Construction underway on Movie World's newest ride
New display name replied to Richard's topic in Theme Park Discussion
I went past movie world yesterday and nothing has changed