Skip to content

DC Rivals HyperCoaster construction discussion

Featured Replies

A full assemble might not happen thou.   Rivals has the same maintenance access door as Star Trek and those cars were loaded in separately.  If anything, I think MW will line one train up to shoot the TVC but not actually join the trains together.  The train would be hard to move around as a fully assembled train. 

o4fkidepryby.thumb.jpg.d6978c14abc2b83131072407681ad5f5.jpg

IMG_0157.JPG.6a93c42f0c5367ba8de707e2db7a3b28.thumb.JPG.630a763736149d9ecb01cd286e0633ad.JPG

Edited by Skeeta

  • Replies 4.9k
  • Views 1.3m
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • So damn SHOOK.

  • Here's a couple i got this morning.

  • ThemeTendo
    ThemeTendo

    Your update for the 10th of June 2017. (and probably my largest so far) Comparison Photo 1 (Stengel/Inclined-Dive Loop): Non-Inverted Loop is becoming more and more visible with each passing

Posted Images

  • Popular Post

Time for todays update, and a few things that have gone un-noticed and some inside goss.

Firstly, a shout to the guys from LOGAN STEEL who are constructing the coaster. Awesome work guys.

So, as shown by @Jakev8 the first pieces of track for the lift hill have been installed today. I've been told the lift hill will be completed next week, with a 350 tonne crane arriving at the start of the week. And the chain should be installed end of next week, beginning of the following week. And then the track will be done, and the electricians will take over.

IMG_1331.thumb.JPG.1bea7436906937ed85034e391e7a9c78.JPG

IMG_1332.thumb.JPG.82257f05d7887fbd0a335237e2bcd5e0.JPGIMG_1340.thumb.JPG.4974d006adce2abcde03aa4931489574.JPG

IMG_1346.thumb.JPG.786e5a620ee3f8d3a94b82ffefe95cee.JPG

IMG_1348.thumb.JPG.de2df5f18b05cc67701f7ef44928e0f5.JPG

IMG_1354.thumb.JPG.f99cab71df5efd5f657ca063939d34a2.JPG

IMG_1368.thumb.JPG.0efa213af7ffa6f43777105947acb94c.JPG

The stairs and other pieces of track and supports are ready for installation

IMG_0187.thumb.JPG.3678b12877ed11e516711fdf0ac2bf58.JPG

IMG_1334.thumb.JPG.4978b62c58d94df9736102104b19729e.JPG

IMG_1337.thumb.JPG.f2893e9fa10c2d88fe5d33c51cc7abb4.JPG

IMG_1344.thumb.JPG.f8c148d7000b8b4d8c6e2b59ab9e1eff.JPG

IMG_1345.thumb.JPG.ca67dbad8c60a71c8253061eaf76bd17.JPG

IMG_1351.thumb.JPG.e5caf3ae8fc1bda27e1ff846196f3439.JPG

IMG_1363.thumb.JPG.a41b1ad506283a41ff5de618d52bea74.JPG

IMG_1364.thumb.JPG.350a9eaf960026d5cbc3f14115c8f03c.JPG

IMG_1365.thumb.JPG.8dd471da7c50c2d12a62f4dcb779ecdb.JPG

 

The first piece of theming can be seen, along with some of the other walls which will form part of it (As we saw in the video). Could this part link to Aquaman with the shark and ocean water seen?

IMG_1374.thumb.JPG.2b0e3db10cfb2a4c4f19382f51c067b6.JPG

IMG_1376.thumb.JPG.21df5ae20c5edbe99617ed56f5111034.JPG

IMG_1370.thumb.JPG.bdca1eeac08f739656266ddc124f9bcd.JPG

I've been told that the drop will actually be steeper than 90 degrees as you go over the top, and will twist as it drops down.

IMG_1372.thumb.JPG.e33d533be8bb881bddce3de5f5a89b74.JPG

Few other things around the site

IMG_0189.thumb.JPG.3c6a5551e75713d831609ae7d7992514.JPG

IMG_0190.thumb.JPG.a1861672d1580a2aeb8ee6447ece6ad5.JPG

What is this?

IMG_1338.thumb.JPG.b0e558dd71ed5e0dae919b48c6472928.JPG

And a support missing for the air time hill

IMG_1366.thumb.JPG.3f32e24c87c8e43164638c35effc1385.JPG

And a few nice shots of the track

IMG_1357.thumb.JPG.e3e4a60230441442ad31cce79f93ff4f.JPG

IMG_1361.thumb.JPG.1155653b5e40fbd60d04cf8a9e52210f.JPG

1 hour ago, themagician said:

What is this?

IMG_1338.thumb.JPG.b0e558dd71ed5e0dae919b48c6472928.JPG

And a support missing for the air time hill

IMG_1366.thumb.JPG.3f32e24c87c8e43164638c35effc1385.JPG

 

 

Red thing looks to be for transporting of the train segments to and from the shipping containers -> maintenance bay. Or as a demonstration stand for whatever the 'public train assembly' entails.

Not a missing support. It's designed like that. If pieces were to be connected to that one there would be a place for bolts, instead, it's just flat - much like the ends of the Non-Inverted Loop supports. (those at the top)

 

Thanks for the updates!

that red thing looks pretty cool. The arms on either side of what looks like track rail fold down. Not only that, they have either hydraulic or pneumatic cylinders in them with big dampener springs too, so it looks like it has some form of cushioning. Even more interesting is the bridges between the rails have cylinders on top of them too. They appear to be attached to the bar above the rails, the one with white angular pieces sticking up. Looks like the cylinders push/pull this bar in and out. Makes me think the whole thing can move in multiple directions. Maybe like the cars are pushed from the transfer on to the track, so instead of needing track rails to mount the train/cars on, they might provide more movement to move the cars about when not setup on the actual transfer track.

I feel with all the electronics and actuators, coupled with the fact it's not painted to match anything it's definitely a jig of some sort. 

"Movie World’s DC Rivals pegged as $30 million catalyst for Gold Coast theme park turnaround

Kathleen Skene, Chief reporter, Gold Coast Bulletin

July 28, 2017 12:00am"

 

"Construction of the coaster has topped at its maximum height of 61.6m ahead of its launch in October."

 

*sigh*

2 hours ago, MaxxTheMonster said:

"Movie World’s DC Rivals pegged as $30 million catalyst for Gold Coast theme park turnaround

Kathleen Skene, Chief reporter, Gold Coast Bulletin

July 28, 2017 12:00am"

 

"Construction of the coaster has topped at its maximum height of 61.6m ahead of its launch in October."

 

*sigh*

Is it at max height?

No but some highly qualified at the GCB has clearly once again been skimming parkz articles and then ripping off as their own story. 

As usual many innacuracies

 

cough #journalism

Lift hill getting a bit higher.

It's now even higher than it's maximum Gold Coast Bulletin height, but still has considerable additional height to reach over the next week or two!

 

1501291742471-1749669989.jpg

Edited by pushbutton

2 hours ago, jack.c said:

Here is some behind the scenes footage of the Mack factory, which features our very own DC rivals being born! 

https://youtu.be/-hUZfJhMmAM

I was going to screenshot the relevant <10 seconds or so of that video, but if I have to sit through the whole slideshow then everyone else can too. 

  • Popular Post
22 hours ago, ThemeTendo said:

train segments

what was I thinking... I meant cars.

Anyway. It's that time of the week. Rivals Update for the week ending 29th/30th July 2017.

Comparison Shot 1

MW_Hyper-29July.thumb.png.5d87ff0392ea98de16b2e8b8fb3201e3.png

I'm still hoping there'll be some visible difference when the first drop is complete... or when the Joker LED head is lit up... (Although, I may have to alter the angle for it to even be visible)

Comparison Shot 2

MW_Hyper-Clustertrack29.thumb.png.920ac0e908f1eff8e7f48bc95b01205c.png

No need for this one anymore.

Lift Hill

MW_Hyper-LiftHill29.thumb.png.cfe31da475c48ab61e676372cc21ae12.png

This was the last piece placed for the day.

DSCN8161.thumb.JPG.f167e7a79fa6035f62791dcb4e95b232.JPG

That second lift hill support perfectly frames the Superman top hat

DSCN8168.thumb.JPG.805d1d0299a893d6adf24a0a58b71848.JPGDSCN8174.thumb.JPG.4de3ee15486724f5b7e45f6cc2e6976c.JPGDSCN8173.thumb.JPG.8fe31220b55f0d242155ac5816514ba3.JPG

Random

DSCN8160.thumb.JPG.46c77b5bab2a3b4779a5236098e5564b.JPGDSCN8163.thumb.JPG.0ad5bce52d58750491db9cc0129c3249.JPG

Panorama

597c3ee59d0b2_DSCN8167(2).thumb.JPG.47fad87c57ff0f4d1a70339fcb4b27cb.JPG

Sorry that it's not the best quality, but I've had to crop it to cut out a grey area.

Guest
This topic is now closed to further replies.

Recently Browsing 0

  • No registered users viewing this page.

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.